Compared to hand-polished drivers, CNC machining yields more precise thicknesses resulting in a thinner and hotter face that increases ball speed and distance.
Ti-8-1-1 Body & Forged E9TM Face
A lightweight 8-1-1 Titanium body and forged face saves discretionary weight to move the CG lower for improved launch and speed. CNC milling delivers a thinner and more precise E9™ variable thickness face structure for increased distance on off-center hits.
Ball Speed Gains
Tested against a traditional hand-polished driver face, the CNC milled face on the KING® F8 driver produced increased ball speeds ranging from 1.2 to 1.6 mph across the face.
WITH DUAL ROLL
Unlike traditional drivers designed with a constant roll radius, COBRA's innovative Dual Roll Technology™ utilizes different curvatures on the top and bottom of the face to optimize launch and spin for shots hit above or below face center.
tilted bulge and roll axis
COBRA's patented Dual Roll™ design features more curvature on the top half of the face and a flatter bottom half to optimize launch and spin for shots hit both high and low on the face.
Using CNC milling, COBRA® engineers were able to design a more precise horizontal face curvature (bulge radius) to compensate for gear effect and deliver more accuracy on shots hit on the heel and toe.
360° AEROTM TECHNOLOGYtm
Polymer crown trips are 10% lighter than Titanium, to help improve aerodynamic performance without raising the CG. Titanium trips are utilized on the sole for increased durability, while lowering the CG for enhanced speed.
less drag more yards
Represented in the CFD (Computational Fluid Dynamics) models below, the streamlined shape of the KING® F8 driver optimizes the flow separation on the crown and sole to significantly reduce drag. Lower drag will give you more clubhead speed and ultimately more distance off the tee.
Two adjustable cg settings:
back & heel
tune ball flight
The back weight setting promotes higher, towering ball flight, while the heel weight setting promotes a slightly lower launch with increased draw bias.
myfly 8 with Smart pad
8 easily adjustable loft settings help you manage trajectory and fine tune launch and spin to maximize distance. Increasing or decreasing the loft will adjust the launch by +/- .5 degrees and the spin by +/- 400 rpms, respectively.
A larger clubhead profile at address paired with two very forgiving (back and heel) weight settings, increases MOI for more distance and speed on off-center hits.
Ultralight Carbon Fiber Crown
Lightweight carbon fiber provides the weight savings needed to incorporate moveable weights into the design, while also repositioning weight low and back for improved launch and forgiveness.
REAL DEAL SHAFTS
A true aftermarket "Tour" shaft featuring premium materials and a stiffer, lower torque profile that reduces spin for improved performance in distance and dispersion.
DISTANCE THROUGH DATA.
|Model||*Loft/Trajectory Settings||Length with|
|KING F8 Driver||9° / 9.5° / 9.5° Draw / 10.5° / 10.5° Draw /
11.5° / 11.5° Draw / 12°
*Loft Adjustable Through MyFly8 Technology. See the COBRA Instruction Guide for details.
|Model||Flex||Shaft Weight||Kick Point||Torque||Trajectory||Spin||Tip Diameter|
|Aldila NV 2KXV Blue 60||Stiff||61g||Mid||4.6||Mid||Mid||0.335|
|Aldila NV 2KXV Blue 60||Regular||60g||Mid||5.0||Mid||Mid||0.335|
COBRA Lamkin REL 360 (Tour Taper) Connect - Nardo
- Great feel, much more consistent Review by Jack
The new driver has all the distance ofmy older Ping driver, but I find myself playing from the short grass much more often now. Fewer mis-hits and much straighter ball flight. The sound and feel of a well hit ball with this club are exquisite. (Posted on 8/18/2018)
- Controlled Use of a Driver Review by Steve
(Posted on 5/20/2018)
- Cobra F8 Review by Rocky
- What am amazing driver. Review by Matt
- Great Feeling Review by Gmoney
- Happy customer Review by Chris
Thank you!! (Posted on 2/23/2018)
- Outstanding Review by Jimmie