Compared to hand-polished drivers, CNC machining yields more precise thicknesses resulting in a thinner and hotter face that increases ball speed and distance.
Ti-8-1-1 Body & Forged E9TM Face
A lightweight 8-1-1 Titanium body and forged face saves discretionary weight to move the CG lower for improved launch and speed. CNC milling delivers a thinner and more precise E9™ variable thickness face structure for increased distance on off-center hits.
Ball Speed Gains
Tested against a traditional hand-polished driver face, the CNC milled face on the KING® F8 driver produced increased ball speeds ranging from 1.2 to 1.6 mph across the face.
WITH DUAL ROLL
Unlike traditional drivers designed with a constant roll radius, COBRA's innovative Dual Roll Technology™ utilizes different curvatures on the top and bottom of the face to optimize launch and spin for shots hit above or below face center.
tilted bulge and roll axis
COBRA's patented Dual Roll™ design features more curvature on the top half of the face and a flatter bottom half to optimize launch and spin for shots hit both high and low on the face.
Using CNC milling, COBRA® engineers were able to design a more precise horizontal face curvature (bulge radius) to compensate for gear effect and deliver more accuracy on shots hit on the heel and toe.
360° AEROTM TECHNOLOGYtm
Polymer crown trips are 90% lighter than Titanium, to help improve aerodynamic performance without raising the CG. Titanium trips are utilized on the sole for increased durability, while lowering the CG for enhanced speed.
less drag more yards
Represented in the CFD (Computational Fluid Dynamics) models below, the streamlined shape of the KING® F8 driver optimizes the flow separation on the crown and sole to significantly reduce drag. Lower drag will give you more clubhead speed and ultimately more distance off the tee.
Two adjustable cg settings:
Front & Back
tune ball flight
The front weight setting promotes a lower, penetrating ball flight, while the back weight setting slightly increases spin for higher launch.
myfly 8 with Smart pad
8 easily adjustable loft settings help you manage trajectory and fine tune launch and spin to maximize distance. Increasing or decreasing the loft will adjust the launch by +/- .5 degrees and the spin by +/- 400 rpms, respectively.
A compact clubhead shape at address delivers reduced spin and a slightly lower launching ball flight for more workability and control.
Ultralight Carbon Fiber Crown
Lightweight carbon fiber provides the weight savings needed to incorporate moveable weights into the design, while also repositioning weight low and back for improved launch and forgiveness.
DISTANCE THROUGH DATA.
|Model||*Loft/Trajectory Settings||Length with|
|KING F8+ Driver||8° / 8.5° / 8.5° Draw / 9.5° / 9.5° Draw /
10.5° / 10.5° Draw / 11°
*Loft Adjustable Through MyFly8 Technology. See the COBRA Instruction Guide for details.
|Model||Flex||Shaft Weight||Kick Point||Torque||Trajectory||Spin||Tip Diameter|
|Fujikura ATMOS Tour Spec 6 Black||X-Stiff||68g||Mid-High||3.4||Low||Low||0.335|
|Fujikura ATMOS Tour Spec 6 Black||Stiff||70g||Mid-High||3.4||Low||Low||0.335|
COBRA Lamkin REL 360 Connect - Volition / Desert Sand
- hot Review by John